AROS Application Development Manual -- IntroductionWarnung This document is not finished! It is highly likely that many parts are out-of-date, contain incorrect information, or are simply missing altogether. If you want to help rectify this, please contact us.
Developing for the AROS platformThis chapter explains how to develop programs that will run on the AROS platform. It also tells you how to compile them on the different machines that AROS runs on. It assumes that you have an average knowledge of the C programming language and of basic concepts like linking. The "Hello, World!" programBelow is a program that shows a "Hello, World!" message - a programmer's tradition since ages (well: 1972). Create a file helloworld.c with the following contents:
#include <stdio.h>
int main(void)
{
puts("Hello World");
return 0;
}
Compiling in the AROS source tree with the build systemIf you have your own source tree of AROS and compiled AROS there, you can use the AROS build system to compile programs for AROS. You do this by putting your program source code somewhere in the AROS tree. First, make a directory there, assuming you are in the top AROS source directory: % mkdir local % mkdir local/helloworld Put the helloworld.c file there, plus an additional file for the build instructions named mmakefile.src, with the following contents: include $(TOP)/config/make.cfg %build_prog mmake=local-helloworld files=helloworld progname=HelloWorld In the top AROS source directory you can now build the helloworld program with the following command: % make local-helloworld After doing so, you'll find the compiled program as local/helloworld/HelloWorld in the binary tree of AROS. The AROS build system is meant to ease your life when building binaries with not-trivial dependencies. It is explained in a separate chapter. Compiling on Linux with the "fake" GCCUnder AROS/hosted you are using a configured version of the Linux GCC. There is a difference depending on whether you use the compiled version of AROS (i386-linux-system) or you compile the source yourself:
You can compile the program with the following command from a Linux shell: % i386-linux-aros-gcc -o helloworld helloworld.c You will find additional tools in the path of the AROS C compiler: AROS versions of ld, ranlib, the catalog compiler FlexCat, etc. Bemerkung If you are using i386-linux-aros-strip you have to add the parameters --strip-unneeded --remove-section .comment. Otherwise strip will create corrupt binaries. Compiling on Linux or Windows with a cross-compilerYou can download a cross-compiler from here. Advantage over the fake compiler is, that you can additionally compile C++ sources. After installing you should update the sys-includes and the libs from a recent SDK. Compiling for native-i386You can download a version of GCC which runs natively under AROS from Sourceforge. You need at least the binutils and the core. Also you'll need an AROS SDK. Unpack them to the same place (for example, sys:ADE). Copy the includes and libs from the SDK to sys:ADE. Then you'd need to use the following commands: path sys:ade/bin add assign Development: sys:ade ConceptsInclude filesAROS comes with a variety of include files. They are placed in sys:Development/include. The subdirectory proto contains include files with function prototypes for the shared libraries. In libraries are headers with structures and defines. Some of the bigger libraries, like Intuition, have their own directory with headers. AROS shared librariesShared libraries are the magic that makes AROS work. Every library is a collection of functions that fulfil a certain purpose. Normally, functions with a similar purpose are contained in one library. For example all the basic memory handling functions are contained in exec.library. Libraries are normally found in the LIBS: directory, but can also be stored at other places. Some important libraries are not stored as a separate file, but are contained in the kernel. However, exactly which libraries are part of the kernel differs between installations, so don't depend on a specific library being part of the kernel. AROS core libraries overviewHere is a list of some important libraries and their purposes. You don't have to remember all of these; they will be discussed in detail later on.
Some additional libraries for very specific tasks, aren't mentioned here. How AROS libraries workThe term library usually refers to an object whose purpose is to collect in a single place functions that may appear in programs more often, usually with all such functions serving one common purpose. E.g. libraries to parse configuration files, to handle localization, and other kinds of tasks which a program might have to perform. A distinction can be made between link-time libraries and run-time libraries. The link-time libraries, as the name suggests, are used only at the program linking stage: the linker collects from the provided libraries just those functions the program requires and together with the program links them into one executable. Run-time libraries, instead, are made available to programs when they are run or during their execution by special request of the program. In most systems the run-time libraries are shared between running programs so they only take up memory for one instance of the library. In such cases the object is often called a shared library. Whilst link-time libraries are handled more or less the same way across all operating systems, since they're independent of the OS itself, run-time libraries may be handled differently by different OS-s. In AROS, before a library can be used in a program it has to be opened. This is done by calling the exec function called OpenLibrary. When a library is successfully opened a pointer to the so called library base is return. The library base is a zone of memory that both holds the function vectors and the library's own data [1]. When libraries are opened they are free to choose whether their bases will be the same for all instances or whether a new one will be allocated each time it's opened. When a function of the library is called, most of the time the library base is passed to the function so the data in the library base can be accessed from inside the library [2]. A library can make part or all of the data in the library base public, by defining a type for the base. Where this is the case you'll find the type in the include file proto/libname.h. This mechanism is used by a number of older libraries, but more recent libraries usually keep all their data private. The only way to change the state of such a library, is through the use of the available functions.
How to use AROS shared librariesAs already explained in the previous section, libraries have to be opened before their functions may be used. Additionally, you have to include a header to make the prototype of the functions known to the code. This include file is in the proto directory, so if you want to use functions of dos.library you have to use the following line: #include <proto/dos.h> The only library that never has to be opened first is exec.library. Exec is always open and your compiler knows how to access it. Your compiler or build environment may additionally open some other libraries for you, so you don't have to open them manually. Read your compiler's manual to learn about such a feature. The paragraphs below list which libraries are opened by the AROS tools, and describe how one opens libraries manually. Auto-opening by gcc from the AROS SDKThe gcc compiler from the AROS SDK auto-opens the following core libraries:
You can disable the auto-opening of these library by providing the -nostdlibs flag to the gcc compiler. For the other libraries provided by AROS you can use the corresponding link-time library that will take care of opening the library. So if your programs uses reqtools.library you add -lreqtools to the gcc command. Bemerkung To summarise: when using the AROS gcc compiler the usage of shared libraries becomes very easy and can be done in two steps:
Auto-opening by the AROS build systemAuto-opening libraries by the build system is very similar to using the AROS gcc compiler. Analog to specifying a -l option, you specify the libs you use in the uselibs parameter to the %build_prog and the %build_module macro. More information can be found in the build system tutorial. Manually open librariesTo open a library you have to use a function of exec.library: #include <proto/exec.h> struct Library *OpenLibrary( STRPTR name, ULONG version ); OpenLibrary() takes two arguments:
The following procedure is used to load the library to open:
OpenLibrary() returns either a pointer to a structure, describing the library (struct Library * defined in exec/libraries.h) or NULL, meaning that opening the library failed for some reason. The resulting pointer has to be stored for the compiler's use. Normally it is stored in a variable in the form: <libraryname>Base, e.g. IntuitionBase for the pointer to intuition.library. After opening the library, you can use its functions by just calling them like any other function in your program. But to let your compiler know, what to do, you have to include the library-specific header-file. This is normally called proto/<libraryname>.h for C compilers. When you've finished using the library, you have to close it again to free the resources it uses. This is done with: #include <proto/exec.h> void CloseLibrary( struct Library *base ); CloseLibrary() closes the library pointed to by base. This may also be NULL, in which case CloseLibrary() does nothing. The use of libraries will be demonstrated by creating a small graphical hello-world program. Instead of printing Hello World! to the console, it will be displayed it in a requester. A function to display a requester is EasyRequestArgs(), which is a function of intuition.library. Its usage will not be discussed here; for more information, see the section about Requesters. Example usage of libraries:
#include <proto/exec.h> /* OpenLibrary() and CloseLibrary() */
#include <exec/libraries.h> /* struct Library */
#include <dos/dos.h> /* RETURN_OK and RETURN_FAIL */
#include <proto/intuition.h> /* EasyRequestArgs() */
#include <intuition/intuition.h> /* struct EasyStruct */
/* This variable will store the pointer to intuition.library */
struct IntuitionBase *IntuitionBase;
int main(int argc, char *argv[])
{
/* Needed for EasyRequestArgs(). */
struct EasyStruct es = {
sizeof(struct EasyStruct), 0UL,
"Requester", "Hello World!", "Ok"
};
/* First, open intuition.library. Version 36 or better is needed,
because EasyRequestArgs() was introduced in that version of
intuition.library.
*/
IntuitionBase = (struct IntuitionBase *)OpenLibrary("intuition.library", 36);
/* Ccheck that intuition.library was successfully opened.
If it was not, return immediately with an error, as you can't call
a function from the library.
*/
if (!IntuitionBase)
return RETURN_FAIL;
/* After opening intuition.library, you can call EasyRequestArgs(). */
EasyRequestArgs(NULL, &es, NULL, NULL);
/* Finally, close intuition.library again. */
CloseLibrary((struct Library *)IntuitionBase);
return RETURN_OK;
}
Try to compile and run this program. It should present you with a handsome hello-world requester. Versioning of librariesShared libraries may evolve over time and new features may be introduced. If a program were to use a feature of a more recent version of the library, running it on a machine that had an older version of the library would most likely lead to a crash. Therefore, versioning of libraries was introduced, so programs can check whether the version of a library is adequate and quit gracefully or reduce the functionality accordingly if it isn't. On AROS and Amiga-like systems, the version is determined by a major number and a minor number (also respectively called version and revision). A new major number indicates the introduction of new features while an increase of the minor number just indicates some optimizations and/or bug fixes, with compatibility. A version of a library is often presented as major.minor [3] and can be retrieved with the version dos command: 5.System:> version dos.library dos.library 41.7 When opening a library, you can provide a version number; opening the library will then fail if the version of the library is lower than this number:
mylibbase = OpenLibrary("my.library", 2);
This will return NULL if only version 1 of my.library is installed. If you use auto-opening of libraries the library will be opened with the version of the library used during link time. This version can be overloaded with a variable named libbasename_version. At the moment the version of dos.library is 41 and this means that programs compiled will only run on other systems that have version 41 of dos.library. If you are sure you're only using features from up to version 36, you can let your program run on these systems by including the following statement somewhere in your code: const LONG DOSBase_version = 36; The consequence for libraries is that they always have to be backwards compatible: if the version of your library is 41 but the program was compiled for version 36 it still need to run without problem. Therefore a function at a certain place in the lookup table always has to perform the exact same function even for a newer version of the library. If you really want to change the behaviour of the function with a certain name you could do that by putting it at another place in the lookup table. At the old location you put then a compatibility function that is still compatible with the behaviour in older library versions. For example, in the first version of AmigaOS the exec function OpenLibrary did not have a version parameter. In a later version of the OS, a new OpenLibrary function was introduced that included the version parameter. While the old function was at position 68, the new function was put at location 92. The function at position 68 was kept for compatibility, but was renamed to OldOpenLibrary.
Difference with other run-time library systemsThe AROS shared libraries have an unique architecture with advantages and disadvantages. Some aspects will be discussed later in this chapter. Windows and Unix(-like) systems are usually taken as reference in those discussions, as for those who port programs the differences are important. Loading of the shared librariesOn AROS the dynamic link libraries are relocatable ELF objects. The first time a library is opened, it is loaded from disk and relocated with the start address it was loaded to. On AROS and Amiga-like systems, memory is shared between all code running on the system as a single big memory region. This approach allows all programs to use the library loaded at the memory it was loaded to. Other systems, including Windows and Unix, have a different virtual address space for each process. Here too the OS tries to load the shared library only once and it then maps the same library in the address space of each of the processes using it. The library may thus be located at different addresses in the different spaces and the OS has to handle this. Windows will first try to locate the shared library at a single location in memory and tries to map it to the same memory region in each process that uses the library. If this is not possible the library will be duplicated in memory. On most Unix systems this problem is avoided by letting the compiler generate position independent code, e.g. code that works at any position in memory without having to relocate the code. Depending on the architecture this type of code may have less or more impact on the speed of the generated code. Dynamic linking of functionsProgrammers that use a higher level language for accessing the functions in a shared library, will use the name of the function they want to use. When a microprocessor executes a program, it uses memory addresses to jump to a certain function. At some point, the name used by the programmer has to be translated into a memory address. On the Amiga, the translation happens when the code is compiled or when a program or module is linked. Every libbase of an AROS library contains a lookup table for the functions of the library. During compilation (or linking) the name of a function is translated into a position in this table where the address of the function can be found [4]. Functions in an AROS shared library are thus accessed with one level of indirection. Depending on the CPU architecture this level of indirection may have more or less influence on the speed of the code. Fortunately, a similar type of indirection is used for calling virtual functions of C++ classes and because of this, most modern CPUs are optimized to handle the indirection without a (big) impact on the speed. As the lookup table is attached to the libbase it has to be duplicated for libraries that use a per-opener base. On Windows and Unix-like systems the translation of the name of a function to an address is done when the program is loaded and linked at run-time with shared library [5]. When the program is linked at compile time a list of libraries is put in the executable together with a list of the functions to be used. These lists are ASCII strings. When the program is then loaded it will convert the functions names to their addresses (or to a pointer in a lookup table). First the libraries in the library list are opened, afterwards each of the functions is looked up in the libraries. Different mechanisms are used for the lookup of the function names. For example on Windows, the functions available are put in a sorted array so a binary search can be performed and on Linux hashes are used to speed up the lookup. Global and static variables in librariesAs said in a previous paragraph, AROS shared libraries are only loaded into memory and initialised once. This also has an impact on the way global and static variables are handled. You can declare a global variable in the source code of your library in the following way: int globvar; This will create a global variable that is accessible in all parts of the library. Once the shared library is loaded into memory your variable will also be located in the memory taken by the library and will always stay at the same location until the library is unloaded from memory. Static variables defined in a function are handled in an analog way. This also means that the code in the library accessing a global variable will always go to the same location no matter how many times the library is opened or which program called the library code. Currently, the only way to have a variable that has a different value per opener of the library is to have a library with a per-opener base and store the library in this base. Also, global variables in AROS shared libraries currently can't exported. They can only be accessed within the library itself; a program using a library can not access the library's global variables directly. In this respect, variables in AROS shared libraries are handled differently from variables in link-time libraries. A global variable defined in a link-time library is also accessible by the program to which the library is linked and every program linked with the same link-time library will have its own version of the global variable. On Unix, shared libraries were introduced after the link-time libraries were already heavily used. One of the design goals then, was to make the behaviour of the shared libraries the same as that of link-time libraries. Therefore, a copy is made of the variables every time a program opens a shared library. In this way every program that opens a shared library will get its own set of the global variables. Also, the global variables of a shared library are automatically exported from that library, so they can also be accessed directly in the program using that library. On Windows, one can choose the behaviour of global variables to be like the AROS way or the Unix way but by default it is handled in the Unix way. For porting shared libraries to AROS or Amiga, this different handling of variables has to be taken into account. Some libraries depend on how variables are handled in Unix and Windows shared libraries and may be difficult to port to AROS. Bemerkung The explanation in this paragraph describes how the handling of data in shared libraries worked when the text was written. At that time there was also discussion on how to extend this to also allow handling similar to the handling done by other library types. Libraries using other librariesA library can open another library. When a library opens another library it will get a libbase for that library. This means that a library that has a per-opener base will return a unique libbase to another library. When a program opens library 1 with a per-opener base, it will get a libbase back. If that program then opens library 2, that itself also opens library 1, then library 2 will get a different base for library 1 than the base the program itself has for that same library 1. Programmers of libraries with a per-opener libbase have to take this into account. As was already discussed before, on Unix and Windows everything is based on processes. When a program is loaded, a new process is created, every shared library used in that process will only be dynamically linked once into the process. This means that a program and shared library that both access a second shared library will use the same instance of that shared library. Again this different behavior may make porting shared libraries from Unix/Windows difficult. Bemerkung Again, the explanation in this paragraph describes how the handling of opening shared libraries from a library worked when the text was written. At that time there was also discussion on how to extend this to also allow handling similar to the handling done by other library types.
Giving additional arguments with taglistsEvery library function takes a fixed number of arguments. This poses quite a problem with complex functions that would need a lot of arguments. To avoid this problem, so-called taglists were introduced. The header file utility/tagitem.h contains a structure TagItem, which includes the members ti_Tag and ti_Data. A taglist consists of an array of this structure. The size of the list is not limited. The field ti_Tag is an identifier (often referred to as Tag) that declares what ti_Data contains. ti_Data is either an integer or a pointer. It is guaranteed to be at least of the size of a long-word or a pointer (whichever is bigger). In every description of a function that uses a tag-list, all possible tags are listed. Functions have to ignore unknown tags and use defaults for tags not provided, so taglists are a very flexible way of providing arguments to a function. There are some special tags that all functions understand (defined in utility/tagitem.h):
You may always provide NULL instead of a pointer to a taglist. All functions must be able to handle NULL pointers. They are equal to taglists with TAG_DONE as first tag. A function that requires a taglist is:
#include <proto/intuition.h>
struct Window *OpenWindowTagList
(
struct NewWindow *newwin, struct TagList *taglist
);
This function will be discussed in detail in the .. FIXME:: chapter about windows. For now, you just need to know that this function opens a new window. Set the argument newwin to NULL. The only tags looked at for now are:
Another function needed for your small example is: #include <proto/intuition.h> void CloseWindow( struct Window *window ); This function is used to close an opened window. Now, have a look at another small hello-world-program. This opens a window, which says "Hello World!" in the title-bar, for two seconds:
#include <proto/exec.h>
#include <exec/libraries.h>
#include <proto/dos.h>
#include <proto/intuition.h>
#include <intuition/intuition.h>
struct DosLibrary *DOSBase;
struct IntuitionBase *IntuitionBase;
int main(int argc, char *argv[])
{
int error = RETURN_OK;
/* You need this for Delay() later on. */
DOSBase = (struct DosLibrary *)OpenLibrary("dos.library", 36);
if (DOSBase)
{
IntuitionBase = (struct IntuitionBase *)OpenLibrary("intuition.library", 36);
if (IntuitionBase)
{
struct Window *win;
/* Set up your tags. */
struct TagItem tags[] =
{
{ WA_Width, 100 },
{ WA_Height, 50 },
{ WA_Title, (IPTR)"Hello World!" },
{ TAG_DONE, 0UL }
};
win = OpenWindowTagList(NULL, tags);
if (win)
{
/* Now wait for two seconds, to show the nice
window.
*/
Delay(100);
/* Close your window again. */
CloseWindow(win);
}
CloseLibrary((struct Library *)IntuitionBase);
}
else
error = RETURN_FAIL;
CloseLibrary((struct Library *)DOSBase);
} else
error = RETURN_FAIL;
return error;
}
Of course, this method of setting up the taglist is quite complicated. So for most functions that use taglists short-cuts are available. The link-library amiga.lib provides these short-cuts for all internal AROS functions. These varargs versions can be used like this:
The example above would look like this, using the varargs version of OpenWindowTagList(), called OpenWindowTags():
[...]
if( IntuitionBase )
{
struct Window *win;
win = OpenWindowTags
(
NULL, WA_Width, 100, WA_Height, 20,
WA_Title, "Hello World!", TAG_DONE
);
)
if( win )
{
[...]
Much easier, isn't it? Getting more documentation"Hello, World!" is not a Museum of Programmer's Talent, so you might wonder if there is more to AROS than that. Why, yes, of course there is! But this guide is neither a Programmer's Guide nor a Programmer's Reference Guide. Such guides might be written in the future, but for now, the best AROS Programmer's Guides you can find are the books that have been written for the Amiga, and the best reference for AROS are the AROS Autodocs (AROS autodocs are descriptions of AROS library functions that are created by parsing the AROS sources). The Autodocs are mainly useful to advanced Amiga programmers, though: they only provide a very short explanation for each function. If you have to learn AROS programming from the start, you really should try to find that old Amiga book, or buy the Amiga Developer CD-ROM. |
Copyright © 1995-2024, The AROS Development Team. All rights reserved.
Amiga®, AmigaOS®, Workbench und Intuition sind eingetragene Warenzeichen von Amiga Inc. Alle anderen Warenzeichen gehören dem jeweiligen Besitzer. |